| sec |
| X: | ||
|
| Y: | ||
|
| Z: | ||
|
| Aw: | ||
|
| Bw: | ||
|
| Cw: | ||
|
| XY: | mm/min |
| Z: | mm/min |
| sec |
Max travel: | mm |
Feed rate: | mm/min |
Plate thickness: | mm |
| Touch status: |
|
| sec |
| Name | Options | Value | Target | ||
|---|---|---|---|---|
| Heater T0 |
| |||
| Heater T1 |
| |||
| Bed |
|
| Extruder |
% |
% |
% |
Extrude | mm |
@ | mm/min |
| SD Files |
| Uploading | % |
| Label | Value | Help |
|---|
| Label | Value |
|---|
| SSID | Signal | Protected | Join |
|---|
| Type | Name | Size |
|---|
| Restarting, please wait.... |
| Name | Icon | Color | Target | Filename/URI |
|---|
| Position Refresh Time: | sec |
| XY feedrate: | mm/min |
| Z feedrate: | mm/min |
| A feedrate: | mm/min |
| B feedrate: | mm/min |
| C feedrate: | mm/min |
| Temperature Refresh Time: | sec |
| Length: | mm |
| E feedrate: | mm/min |
| Number of extruders: |
| Status Refresh Time: | sec |
| Max travel: | mm |
| Feed rate: | mm/min |
| Touch plate thickness: | mm |
| File extensions (use ; to separate): |
| Restarting, please wait.... |